A 3D mesh deformation technique for irregular in‐flight ice accretion

Aircraft holding around busy airports may be requested to sustain as much as 45 min of icing before landing or being diverted to another airport. In this paper, a three‐dimensional mesh deformation scheme, based on a structural frame analogy, is proposed for the numerical simulation of ice accretion during extended exposure to adverse weather conditions. The goal is to provide an approach that is robust and efficient enough to delay or altogether avoid re‐meshing while preserving (enforcing) nearly orthogonal elements at the highly distorted ice surface. Robustness is achieved by suitably modifying the axial and torsional stiffness components of the frame elements in order to handle large and irregular grid displacements typical of in‐flight icing. Computational efficiency is obtained by applying the mesh displacement to an automatically selected small subset of the entire computational domain. The methodology is validated first in the case of deformations typical of fluid‐structure interaction problems, including wing bending, a helicopter rotor in forward flight, and the twisting of a high‐lift wing configuration. The approach is then assessed for aero‐icing on two swept wings and compared against experimental measurements where available. Copyright © 2015 John Wiley & Sons, Ltd.     

Experimental study on age and gender differences in microscopic movement characteristics of students

Campus security has aroused many concerns from the whole society. Stampede is one of the most frequent and influential accidents in campus. Studies on pedestrian dynamics especially focusing on students are essential for campus security, which are helpful to improve facility design and emergency evacuation strategy. In this paper, primary and middle school students were recruited to participate in the single-file experiments. The microscopic movement characteristics,including walking speed, headway, gait characteristics(step length, step frequency and swaying amplitude) and their relations were investigated. Age and gender differences in the headway-speed diagram and space requirements were analyzed by statistical tests. The results indicated that the impacts of age and gender were significant. There were three stages for the influence of gender on the headway-speed diagram for both age groups. The impacts on students' space requirements were consistent for different age and gender groups. But the impacts of age and gender on free-flow speed were affected by each other. Due to the connection of walking speed and gait characteristics, the comparisons of gait characteristics between different ages and genders were performed to understand the corresponding differences in speed more deeply. The results showed that differences in step length and swaying amplitude between males and females were significant for both age groups. The effect of gender on step frequency was significant for primary students. But for middle school students,whether gender had significant impact on step frequency was not clear here because of the large P-value. Besides, the influence of age on gait characteristics changed with gender.     

Sensory and Chemical Characteristic of Two Insect Species: Tenebrio molitor and Zophobas morio Larvae Affected by Roasting Processes

The volatile compounds from insects (Tenebrio molitor and Zophobas morio larvae) roasted at 160, 180, or 200 °C and fed with potato starch or blue corn flour were isolated by solid-phase microextraction (SPME), and identified by gas chromatography–mass spectrometry (GC-MS). In the tested material, 48 volatile compounds were determined. Among them, eight are pyrazines, aroma compounds that are formed in food products during thermal processing due to the Maillard reaction. Eleven of the identified compounds influenced the roast, bread, fat, and burnt aromas that are characteristic for traditional baked dishes (meat, potatoes, bread). Most of them are carbonyl compounds and pyrazines. To confirm the contribution of the most important odorants identified, their odor potential activity values (OAVs) and %OAV were calculated. The highest value was noted for isobuthylpyrazine, responsible for roast aroma (%OAV > 90% for samples roasted at lower temperatures), and 2,5-dimethylpyrazine, responsible for burnt aroma (%OAV > 20% for samples roasted at the highest temperature). According to the study, the type of feed did not significantly affect the results of the sensory analysis of roasted insects. The decisive influence was the roasting temperature. The highest scores were achieved for Tenebrio molitor larvae heat-treated at 160 °C.     

阵列式压电振子超声复合喷丸强化*

为了进一步改善超声喷丸强化质量,提升工件表面残余应力和显微硬度的均匀性,对压电振子阵列型超声喷丸强化加工系统进行了改进,提出了在强化加工过程中辅助工件往复运动的方法。对改进后的压电振子阵列型超声喷丸强化加工原理进行了阐述,分析了激振片的振动特性并进行了结构尺寸优化,应用Abaqus对工件往复运动下超声喷丸强化过程进行了仿真研究,分析了在不同的工件往复运动频率下,工件表面残余应力分布情况。实验测试了在不同喷丸强化时间及工件往复运动频率下超声喷丸强化加工质量,探究了喷丸时间和工件往复运动频率对工件表面显微硬度的影响。结果表明：在压电振子阵列型超声喷丸强化过程中辅助工件往返运动,可以有效提高工件表面残余应力和显微硬度分布的均匀性,工件表面强化质量得到提升。     

软机器人的运动行为研究进展

软机器人的出现不仅弥补了传统机器人的缺点,并逐渐成为机器人领域的热点和前沿之一,近年来该领域研究进展十分迅速。本文总结了典型软机器人的运动行为的研究进展,介绍了软机器人按材质类型的分类(包括液晶软机器人、生物分子软机器人、PDMS软机器人、液体软机器人和自振荡凝胶软机器人)及其功能和潜在应用,讨论了当前不同类别软机器人运动的特点和存在的问题,在此基础上展望了软机器人领域面临的机遇、挑战和未来发展方向。     

地表温度对颗粒跃移轨迹的影响

为了研究由地表温度变化引起的向上的垂向气流对沙粒跃移运动的影响,本文给出了考虑近地表温度变化和水平来流风场作用下的沙粒的跃移运动。在定量给出不同时刻的近地表温度和垂向风速的基础上,计算了由于太阳辐射所引起的近地表层垂向气流对沙粒跃移运动的影响,发现:垂向风速在午后可达到1.5m/s并使得沙粒跃移轨迹的最大高度和长度分别增加55.56%和73.68%;同时,与不考虑温度效应的情况不同的是,沙粒跃移轨道最大高度将随粒径变化。     

盾构叠交隧道地层移动分析

用盾构法在软土中建造叠交隧道有一个重要现象：当一条隧道在另一条相邻隧道上方掘进时，在没有欠挖或过量压浆等施工因素的影响下地面仍然会隆起。中对此作了探讨，依据弹性理论提出一个地面隆起变形公式，将该公式与地面沉降的派克(Peck)公式进行叠加，建立了盾构叠交隧道地层移动的数学模型，分析了黄浦江行人观光隧道掘进跨越上海地铁2号线时的地层移动，计算结果与现场测试相符合。     

雅砻江锦屏水电站工程区活动构造研究及地壳稳定性评价

北东向的锦屏山-小金河断裂带从北东到南西斜穿整个锦屏水电站工程区。在它的东南和西北分别有北北西走向的羊坪子-纸厂沟断层组和北西走向的前波、高牛场等断层。锦屏山-小金河断裂带的马山头-周家坪断层组、瓦科断层组和北西向前波断层等晚第四纪继续活动, 但活动强度很弱。工程区新构造运动以整体抬升为主, 兼水平滑移和旋转运动。历史至今, 工程区地震活动微弱, 是地壳相对稳定的地区。     

Nodeless variable finite element method for heat transfer analysis by means of flux-based formulation and mesh adaptation

Based on flux-based formulation, a nodeless variable element method is developed to analyze two-dimensional steady-state and transient heat transfer problems. The nodeless variable element employs quadratic interpolation functions to provide higher solution accuracy without necessity to actually generate additional nodes. The flux-based formulation is applied to reduce the complexity in deriving the finite element equations as compared to the conventional finite element method. The solution accuracy is further improved by implementing an adaptive meshing technique to generate finite element mesh that can adapt and move along corresponding to the solution behavior. The technique generates small elements in the regions of steep solution gradients to provide accurate solution, and meanwhile it generates larger elements in the other regions where the solution gradients are slight to reduce the computational time and the computer memory. The effectiveness of the combined procedure is demonstrated by heat transfer problems that have exact solutions. These problems are: (a) a steady-state heat conduction analysis in a square plate subjected to a highly localized surface heating, and (b) a transient heat conduction analysis in a long plate subjected to a moving heat source. The English text was polished by Yunming Chen.     

Calculating parameters for infiltration equations from soil hydraulic functions

Simple equations for predicting infiltration of water into soil are valuable both for hydrological application and for investigating soil hydraulic properties. Their value is greatly enhanced if they involve parameters that can be related to more basic soil hydraulic properties. In this paper we extend infiltration equations developed previously for positive surface heads to negative heads. The equations are then used to calculate infiltration into a sand and a clay for a range of initial and surface conditions. Results show errors of less than three percent compared with accurate numerical solutions. Analytical approximations to parameters in the equations are developed for a Brooks and Corey power law hydraulic conductivity-water content relation combined with either a Brooks and Corey or a van Genuchten water retention function. These are compared with accurate numerical values for a range of hydraulic parameters encompassing the majority of soil types and a range of initial and boundary conditions. The approximations are excellent for a wide range of soil parameters.An important attribute of the infiltration equations is their use of dimensionless parameters that can be calculated from normalised water retention and hydraulic conductivity functions. These normalised functions involve only parameters that it may be possible to estimate from surrogate data such as soil particle size distribution. Application of the equations for predicting infiltration, or their use in inferring hydraulic properties, then involves only simple scaling parameters.